0 Items
← Back to FAQ

 

Install

To install the Pinlock® Tear-Off pins, place the inner part of the pin on the inside of the visor. Then place the Tear-Off button on the outside of the visor, on top of the other side of the pin. Tighten the pins on the visor with the screw by using a PZO screwdriver and 5 mm Hexagon. When installing a new Pinlock® lens, make sure that the indicator (little arrow) of the pin is facing outwards.

Adjust

Please remove the Pinlock® lens before adjusting the Pinlock® Tear-Off pins.
Adjust the pin by turning them from the outside using a small screwdriver. Increase the tension on the lens by turning the indicator more inwards.

When the silicone bead of the Pinlock® lens makes a full seal all around the lens and the visor, the adjustment is complete. Does your lens not make a full seal with your pins at maximum tension? Feel free to contact us at info@pinlock.com.