0 Items

Installing and adjusting the Pinlock® Three Component pins

  Install To install the Pinlock® Three Component pins, place the inner part of the pin on the inside of the visor. Then place the outer part on the outside of the visor, on top of the other side of the pin. Tighten the pins on the visor with the screw by using a...

Installing and adjusting the Pinlock® Tear-Off pins

  Install To install the Pinlock® Tear-Off pins, place the inner part of the pin on the inside of the visor. Then place the Tear-Off button on the outside of the visor, on top of the other side of the pin. Tighten the pins on the visor with the screw by using a...

Installing and adjusting the Pinlock® Push pins

  Install To install the Pinlock® Push pins, firmly push the pins in the right position into the visor. When installing a new Pinlock® lens, make sure that the indicator (little arrow) of the pin is facing outwards. Adjust Please remove the Pinlock® lens from the...

When do I need to adjust the Pinlock® pins?

  If your Pinlock® lens does not seal all the way around the inside of your visor, the adjustment of your pins might help you solve this. Over sustained periods of use, the Pinlock® fog resistant lens may shrink slightly. The pins can be turned to prevent the...